Coat closets should have a minimum of 28 inches of depth -- 30 inches is ideal -- to prevent sleeves and bulky coats from interfering with the closet door..
Likewise, what is the minimum depth for a coat closet?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn't deep enough to allow hanging clothes.
Likewise, what is the size of a standard closet? A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.
Additionally, what is the standard depth of a hall closet?
For reach-in closets, the standard depth is 24 inches and is used for suits, shirts, dresses, and pants. The 2 foot depth is required to handle your hanger. For coats and jackets, use a depth of 28 inches.
How do you design a closet?
How To Design A Practical Closet
- Only build what you need.
- Tip: Hang the top rod high enough so you have enough space between the bottom of the hanging clothes and the second rod underneath.
- Focus on ergonomics.
- Skip the drawers.
- Add storage elsewhere.
- Get smart with your shoes.
- Don't waste your money on 'clever' accessory storage.
- Go for flexibility.
Related Question Answers
How wide does a closet need to be to hang clothes on both sides?
The short answer: If you want hanging clothes on both sides, you need at least a full 6′ wide space. Any less and people will have a really hard time maneuvering in the space. Especially if they are anything more than average size adults.How deep does a wardrobe need to be?
You should allow 600mm depth to hang clothes. The depth needed for opening the doors depends on how wide the doors are! So for a 500mm wide door, you would need 500mm space in front of the cupboards to open it completely.How deep should a linen closet shelf be?
The ideal depth of a linen closet is 16 to 20 inches deep, like the one shown here. This will keep your linens easier to see.How does Martha Stewart organize linen closet?
Keep Your Linen Sets Together "Fold the pillow cases and store them inside your flat sheet, and then fold your fitted sheet and fold it around the flat sheet and pillow cases. Now when you store them inside your linen closet they will all be grouped together."How wide should linen closet shelves be?
A typical linen closet is usually 30 to 36 inches wide. This width allows for side-by-side storage of towels, bed sheets and other items on the shelves. Shelf board is easily cut to any dimension, so planning a closet around the size of the shelving is not necessarily a good thing.How many coats fit in a closet?
About six jackets hang per foot of closet space, which means in a family-size home with six people, each owning three coats, 3 feet of closet space is required. Typical coat closet widths range from 3 to 6 feet. Allowing more room for thick winter coats and jackets is advisable.How much space should be between closet rod and shelf?
Measure for the distance away from the wall. A minimum of 10 inches is best, but it'll depend on the size of your hangers. If there is a shelf above the rod, determine the vertical distance from the rod to the shelf; two inches should be suffice.What do you line linen closet shelves with?
After you know what's going into the closet, wipe the shelves with a damp cloth or sponge and wait until dry before lining them. Unbuffered acid-free tissue paper is great for linen storage because it doesn't discolor fabrics over time. Lay some over shelves or wrap antique linens to prevent yellowing.How wide should closet drawers be?
Width: Drawers need to install between closet panels; therefore, standard drawer widths will be the same as standard closet shelf sizes. Standard closet organizer sections allow for widths of 18-inches, 24-inches, and 30-inches. Depth: Standard depths are 14-inches, 16-inches and 20-inches.How much does it cost to build a linen closet?
Building a reach-in closet will cost about $1,000 to $2,500, depending on the design. The simplest construction includes a single rod to hang clothing. But, with the right accessories, you can make your reach-in almost as functional as a walk-in. For example, add wires or mounting systems for more storage options.How big is a standard closet door?
Closet and Utility Doors Newer comes usually have a width of 30 inches and a standard high of 96” inches.What is the minimum size for a bedroom closet?
FYI: state codes vary, but in general, a bedroom must: - be at least 70 sq. ft. and have a minimum of seven lineal feet from one wall to another, not including the closet.What is a good size master closet?
Layout and Space Requirements A walk-in master closet should be a minimum of 7-by-10 feet, and preferably 100 sq. ft. for two users. That gives you space to line two or three walls with shelves, cubbies, and poles, and the elbow room to reach them easily. 
